5 Reasons Why Your Air Conditioner May Not Feel Cool

When the temperature begins to rise outside, you depend on your air conditioner to keep your residence cozy. Your AC may be on, but the air coming from your vents appears too hot.

Here are the most standard reasons why this occurs and what actions you can take to fix it. If you require air conditioning repair in Oakville, the Experts at Abbey Air Home Services by Enercare can assist you. Like always, all our AC repair labor is upheld by a 100% Satisfaction Guarantee.*

1.Your Thermostat is Set Incorrectly

Look at the fan setting. If it says “on,” the fan will run even when the AC compressor isn’t running. Nothing’s wrong with this, but your electricity costs will increase if the fan runs all the time. Change the setting to “auto,” and the blower will only operate when the compressor is running. This also means the air radiating from the vents will repeatedly feel cold.

2.Filter is Dirty

The HVAC air filter traps airborne particles that can wear out your heating and cooling equipment. If it ends up being too obstructed, it can restrict airflow. This reduces how much warm air goes over the indoor evaporator coil. If the refrigerant passing through the coil becomes too cool, it freezes, blocking the cooling cycle from happening. To stop this, change the filter monthly or as advised by the manufacturer.

3.Not Enough Refrigerant

Refrigerant is essential for air conditioning. It shifts from a low-pressure gas to a high-pressure liquid as it cycles between the indoor evaporator coil and outdoor condensing unit. If there isn’t enough refrigerant, your air conditioner will run badly and may not generate sufficient cool air. It may also lead to a frozen evaporator coil, which as we already mentioned, stops the cooling cycle fully. You’ll need aid from an HVAC professional, like one from Abbey Air Home Services by Enercare, to solve any refrigerant issues.

4.Condensing Unit is Blocked

The outdoor piece of your AC unit is known as a condenser. This is basically a big heat sink that transfers humid air from your house. If the metal fins are covered with cobwebs, the condenser can’t run well. Rinse down the unit to eliminate debris that builds up and trim back bushes to confirm the condenser isn’t obstructed.

5.Condenser Fan or Compressor has Worn Out

While you’re examining the condenser, verify the big fan on the top of the system is going. If the fan motor has stopped working, the condensing unit can’t exhaust heat properly, and your air conditioner may start circulating warm air into your home.

Pay attention to the sound of the compressor running within the condensing unit as well. This is what drives your air conditioner, as the component reduces the temperature of the refrigerant. Then, the refrigerant can capture more warmth when it moves back into your home. If the compressor stops working, you’ll likely need to purchase a new system and schedule air conditioning installation.

If you’re experiencing other strange noises when your equipment is cooling, take a look at our guide that deciphers what common air conditioning noises mean.

Did you figure out the issue using these ideas? If not, our Abbey Air Home Services by Enercare Experts are ready to support you. Get in touch with us at 289-813-5566 or contact us online to schedule your air conditioning repair appointment now.